Safety and product information

The BlackBerry Radar device complies with:

A minimum separation distance of 20 cm must be maintained between the user’s body and the BlackBerry Radar device.


Downloadable Safety Information documents

Radar-M Safety Information

Radar-L Safety Information

Radar-H2 Safety Information

Cargo Sensor Accessory Safety Information


Operating temperature and humidity

BlackBerry Radar devices are designed for the following temperature and humidity ranges.

Operation:

Storage:

Battery safety

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.


Mobile network radio specifications

BlackBerry Radar-M ITA100-1

LTE band support: None

HSPA+ band support: UMTS B1, UMTS B2, UMTS B5, UMTS B6, UMTS B8

GSM Band: GSM850, GSM900, GSM1800, GSM1900

GSM Power Class: Class 1 (DCS1800, PCS1900), Class 4 (GSM850, GSM900)

UMTS Power Class: Class 3 (UMTS B1, UMTS B2, UMTS B5, UMTS B6, UMTS B8)

Transmitter frequency: 1920MHz to 1980 MHz, 1850MHz to 1910MHz, 824MHz to 849MHz, 830MHz to 840MHz, 880MHz to 915MHz

Receiver frequency: 2110MHz to 2170MHz, 1930MHz to 1990MHz, 869MHz to 894MHz, 875MHz to 885MHz, 925MHz to 960MHz

BlackBerry Radar-L ITB100-1

LTE band support: None

HSPA+ band support: UMTS B1, UMTS B2, UMTS B5, UMTS B19, UMTS B8

GSM Band: GSM850, GSM900, GSM1800, GSM1900

GSM Power Class: Class 1 (DCS1800, PCS1900), Class 4 (GSM850, GSM900)

UMTS Power Class: Class 3 (UMTS B1, UMTS B2, UMTS B5, UMTS B19, UMTS B8)

Transmitter frequency: 1920MHz to 1980 MHz, 1850MHz to 1910MHz, 824MHz to 849MHz, 830MHz to 845MHz, 880MHz to 915MHz

Receiver frequency: 2110MHz to 2170MHz, 1930MHz to 1990MHz, 869MHz to 894MHz, 875MHz to 890MHz, 925MHz to 960MHz

BlackBerry Radar-H2 ITC100-1 and ITC100-2

GSM 850: 824~849 MHz

GSM 900: 880~915 MHz

GSM 1800: 1710~1785 MHz

GSM 1900: 1850~1910 MHz

WCDMA B1: 1920~1980 MHz

WCDMA B2: 1850~1910 MHz

WCDMA B5: 824~849 MHz

WCDMA B8: 880~915 MHz

LTE B2: 1850~1910 MHz

LTE B4: 1710~1755 MHz

LTE B5: 824~849 MHz

LTE B12: 698~716 MHz

868MHz: 868~868.6 MHz

915MHz: 902~928 MHz


Power class information

Output power is compliant with 3GPP TS 34.121-1 and 3GPP TS 51.010-1.

WCDMA/HSDPA/HSUPA power class

GSM/GPRS power class

EDGE power class


Compliance information - BlackBerry Radar-M ITA100-1

FCC compliance statement (United States)

FCC Class B Part 15

This device complies with Part 15 of the Federal Communications Commission (FCC) Rules under FCC ID XPYLISAU201. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION:

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause interference harmful to radio communications.

Industry Canada certification

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This device complies with Industry Canada RSS 130, RSS 132, RSS 133, RSS 139, RSS 199, and RSS-GEN under Certification Number 8595A-LISAU201.

Class B compliance

This device complies with the Class B limits for radio noise emissions as set out in the interference-causing equipment standard entitled “Information Technology Equipment (ITE)--Limits and methods of measurement,” ICES-003 of Innovation, Science and Economic Development Canada.

EU regulatory conformance

BlackBerry hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at EU compliance documents.


Compliance information - BlackBerry Radar-L ITB100-1

FCC compliance statement (United States)

This device complies with Part 15 of the Federal Communications Commission (FCC) Rules under FCC ID L6AITB100-1. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION:

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause interference harmful to radio communications.

Innovation, Science and Economic Development Canada certification

This device complies with Innovation, Science and Economic Development Canada (ISEDC) license-exempt RSS standard(s). Operation is subject to the following conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This device complies with Industry Canada RSS 130, RSS 132, RSS 133, RSS 139, RSS 199, and RSS-GEN under Certification Number 8595A-1CGM5NNN.

Class B compliance

This device complies with the Class B limits for radio noise emissions as set out in the interference-causing equipment standard entitled “Information Technology Equipment (ITE)--Limits and methods of measurement,” ICES-003 of Innovation, Science and Economic Development Canada.

EU regulatory conformance

BlackBerry hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at EU compliance documents.


Compliance information - BlackBerry Radar-H2 ITC100-1 and ITC100-2

FCC compliance statement (United States)

This device complies with Part 15 of the Federal Communications Commission (FCC) Rules under FCC ID: L6AITC100-1. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION:

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause interference harmful to radio communications.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Innovation, Science and Economic Development Canada certification

This device complies with Innovation, Science and Economic Development Canada (ISEDC) license-exempt RSS standard(s). Operation is subject to the following conditions:

  1. this device may not cause interference, and
  2. this device must accept any interference, including interference that may cause undesired operation of the device.

This device complies with ISEDC RSS 130, RSS 132, RSS 133, RSS 139, RSS 210, RSS 310 and RSS-GEN under Certification Number 2503A-ITC1001.

Le présent appareil est conforme aux Innovation, Sciences et Développement économique Canada (ISEDC) applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:

  1. l’appareil ne doit pas produire de brouillage, et
  2. l’utilisateur de l’appareil doit accepter tout broillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Le smartphone est conforme aux normes ISEDC RSS 130, RSS 132, RSS 133, RSS 139, RSS 210, RSS 310 et RSS-GEN sous le numéro d'agrément 2503A-ITC1001.

Class B compliance

This device complies with the Class B limits for radio noise emissions as set out in the interference-causing equipment standard entitled “Information Technology Equipment (ITE)--Limits and methods of measurement,” ICES-003 of Innovation, Science and Economic Development Canada.

EU regulatory conformance

BlackBerry hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at EU compliance documents.


Compliance information - BlackBerry Radar Cargo Accessory ITD100-1

Exposure to radio frequency signals

The device radio is a low-power radio transmitter and receiver. It is designed to comply with Federal Communications Commission (FCC) and Innovation, Science and Economic Development Canada (ISED), and The Council of the European Union guidelines and limits, as well as other relevant international guidelines regarding safety levels of radio frequency exposure for wireless devices. These guidelines were developed by independent scientific experts, governments, and organizations including the Institute of Electrical and Electronics Engineers Standard (IEEE), National Council on Radiation Protection and Measurements (NCRP), and International Commission on Non-Ionizing Radiation Protection (ICNIRP).

This device complies with FCC, ISED, EU, and other relevant international radio frequency exposure guidelines and limits, at minimum separation distance of 7.9 inches or (20 cm).

Federal Communications Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

FCC Caution:

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Innovation, Science and Economic Development Canada certification

This device complies with Innovation, Science and Economic Development Canada (ISED) license-exempt RSS standard(s). Operation is subject to the following conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux Innovation, Sciences et Développement économique Canada (ISDE) applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

ICES-003 (Class B compliance)

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios.

Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une autre antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées.

Radiation Exposure Statement:

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Déclaration d’exposition aux radiations :

Cet équipement est conforme aux limites d'exposition aux rayonnements ISDE établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

EU regulatory conformance

Hereby, BlackBerry declares that the radio equipment is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at EU compliance documents.